RC Logger LC

Article 1 of 1

RC Logger LC

The "RC Logger LC" has an internal memory and logs all add-on sensor data into the memory which can be analyzed with the RC Logger Viewer PC Software.
Package Weight: 0.1 kg

The RC Logger LC has an internal 4 MB flash memory chip and logs all add-on sensor data into the memory which can be analyzed with the RC Logger Viewer PC Software. Data may also be transmitted to a Notebook or PC via the down-link TX/RX module (available as add-on). The RC Logger LC connects maximum 8 add-on modules at the same time and is fully compatible with the RC Logger HD. Alternatively data may be viewed in real-time via the RC Logger LC LCD ground display station using the down-link module.

The RC Logger LC can be triggered via a free RC receiver channel or manually and set to auto-triggering mode. It includes a microUSB charging port, a down-link data port to connect the TX/RX module as well as an add-on sensor data port and a power and status LED . The trigger interval can be customized by the user via the RC Logger Viewer PC software.The trigger cable (included) could be used to connect the RC Logger PRO with your R/C Model and to draw power from your R/C's on-board power system.

The following items are included in the delivery:

Product code:

  • 10003RC
  • External sensor data bus (connect up to 8 external sensor modules)
  • Status LED
  • Power LED
  • Trigger/Power input (trigger automatically or by receiver/transmitter)
  • 4 MB internal flash memory
  • microUSB 2.0 data/charging port
  • TX/RX port for 2.4 GHz wireless ground transmission modules
  • Upgradeable firmware
  • Device driver for Windows 2000/XP/Vista/7 (64 bit currently not supported)
Output (Camera)
Storage 4 MB
General Specifications
Connections Data to PC port (microUSB - USB 2.0), Trigger port (Futaba type), Module port (1 port / max. 8 modules), TX/RX module port
Internal battery 1 x CR1220 (3 V/DC)
Storage 4 MB
Technical Specifications
Current consumption max. 150 mA (without additional modules), max. 750 mA (with additional modules)
Operating voltage 4.8 to 6 V/DC
Output current to external sensor max. 600 mA
Output voltage to external sensor 3.6 to 6 V/DC
Physical Specifications
Dimensions (W x H x D) 52 x 15 x 33 mm
Weight 16.5 g

Write Product Review

You have to be logged in to write a review.
writes: 13.11.2012
Yea its great, very small and very high quality.
writes: 13.11.2012
I have been impressed with your quick response to my initial order, follow-up emails discussing the partial shipment and back order, emails when I had a problem, and now this offer. Your company's attention to customer service is outstanding and that surely bodes well for your success.