RC EYE 650

Article 1 of 1

RC EYE 650

RC Eye 650 kit including 4x special Scorpion brushless motor(s), mechanical parts, wires, electronic components, flight control with MEMS gyro, motor driver, accessories, assembly and operating instructions.
Weight: 2.4 kg

RC Logger is proud to announce release of the new RC EYE Tweaker Software 1.10 and Firmware 7.0!

The brand new RC EYE Tweaker Software with new Firmware Version 7.0 can be updated easily. It helps the you to adapt the RC EYE behavior to your needs by changing the flight parameter then transferring them to the hardware. More details can be found here.

X-mode Retrofit Kit (for RC EYE 650) available now!

We are happy to announce that our new RC Logger product - X-mode Retrofit Kit for RC EYE 650 (88025RC) is available now. The X-mode Retrofit Kit is designed for flying in X-mode and guarantees a remarkable flying experience. More details can be found here.

RISC Microprocessor flight control

The RC Eye 650 kit is designed in Germany and is equipped with latest Atmel RISC processor and MEMS gyro technology with an acceleration sensor. It provides perfect and flawless flight-control, stunning flight-leveling and perfectly matched motor-driver technology that specially catered for long and powerful flights. The light weight aluminium and plastics composite based frame provides excellent flight stability and protection of all electronic components. Alos, an UART interface allows expert flight control programming, parameter adjustment or data logging capabilities - or simply add your very own custom hardware. In addition, with Scorpion's brushless motor technology, the 650 is guaranteed for maximum performance, efficiency and flight experience,

 

Hook-Up your RC Logger PRO (special mounting plate set included with kit) and step into the world of FPV flying. Due to its extreme stability, this aircraft is an ideal platform to FPV and OSD flight experience. The 650 also features additional space for mounting the OSD and wireless 5.8 GHz video transmission modules or RC Logger add-on modules round-up one complete solution.

Light up the sky

The main frame provides space for an additional available light-control PCB. The optional night flying add-on kit includes a controller for 8 outputs supporting single LEDs or LED strips (included with night flying add-on kit).

 

Aerial photography at its best

RC EYE 650's large landing construction is designed this way to allow additional load such as cameras for aerial photography and the main frame provides mounting holes for any custom made mounting plate. We have included a mounting plate specifically designed for the RC Logger PROfor you in the kit. The RC Eye 650 has plenty of power reserve to lift even large objects, at the same time ensuring long flight time provided through Scorpions motor technology. We believe that flight stability and power efficiency are the key ingredients to successful aerial photography or videography, hence, the RC Eye 650 was constructed to provide you with more than that at an affordable price.

Connect your controls

Link up your RC Logger devices such as the GPS add-on module and IMU add-on module to get even more out of your RC Eye 650 flight experience. We are currently developing a communication interface that will add autonomous flying capabilities to this extraordinary aircraft. Experienced pilots have the freedom of choosing and adjusting individual flight control parameters such as pitch, roll, yaw and throttle. Just connect the craft to your PC using the additional data kit and adjust your personal level of control. The RC Eye 650 offers various standard flight modes which do not require user programming or PC interfacing.

The following items are included in the delivery:
  • RC Eye 650 kit including 4x Scorpion brushless motor(s), includes all mechanical parts, wires
  • 2x Motor driver PCB
  • 1x Flight control board with MEMS gyro (QC-09)
  • 1x PWM signal converter(QC-07)
  • 2x Anti slip battery strap
  • Special ABS mounting bracket for RC Logger HD, HD2, PRO, X2
  • 4x High performance propeller, glasfiber enforced
  • Sticker set
  • Assembly and operating instructions
Additional RC equipment required:
  • Standard RC radio set (TX/RX), minimum 6-channel, 2.4 GHz preferred
  • 11.1 V, 30 C, 3600 mAh - 4000 mAh, 3 S LiPo battery (one required)
  • Suitable LiPo battery balancer and charger
  • BEC regulator with 3 A/5 V continuous output current, supports 3 S 12 V LiPo battery power input (required for powering additional devices or receivers with power rating higher than 350 mA/5 V)
Product code:
  • 88001RC

Flight performance and control:

  • 3 selectable flight modes from novice to expert
  • Flight configuration as "CROSS-" and "X-" mode (X-mode available from Q2/2012)
  • Heading hold mode (Agility mode)
  • Support for TX mode 1, 2, 3 and 4 (refer to user manual)
  • Supported by powerful RISC microprocessor technology
  • Complex flight control system including position and acceleration sensing with MEMS technology
  • PWM signal converter to connect a wide selection of TX/RX (Serializer PWM to PPM Encoder)
  • High thrust due to light weight construction
  • Extended flight time due to high efficiency

Mechanical construction and frame:

  • High grade plastic composite material, aluminium combination
  • Main stabilizing plate made of special rigid composite material (manufactured in Germany)
  • Wide and tall landing skid construction providing room for additional payload
  • Rigid but lightweight construction
  • Additional space for extension boards
  • Center of gravity variable battery slot with anti slip surface battery straps
  • Balanced rotor blades, GF enforced

Electronics and motor:

  • Flight control (QC-09) powered by Atmel RISC processor and MEMS technology
  • PWM signal converter (QC-07)
  • Atmel Mega8 RISC processor based brushless motor controller
  • Innovative MEMS gyro technology
  • Gyro and acceleration sensor for optimized flight leveling
  • RS232 interface allowing software (firmware) updates and custom add-ons
  • Status- and servo- signal interface (UART) for customization
  • Data kit, configuration options via PC software (optional accessory)
  • Night flying kit (QC-06), 8 outputs for LED's and LED strips (optional accessory)
  • Battery warning and locator function
  • High performance specially designed brushless motors powered by Scorpion technology and reliability
  • High power motor driver
  • High power connector(s) included
General Specifications
Control options Aileron, Elevator, Rudder, Throttle
Maximum liftoff weight 2,000 g (4.4 lbs)
No load weight 880 g (without battery and additional load)
Rotor Diameter 305 mm
Technical Specifications
Air humidity Max. 80%, non-condensing
Battery dimension 142 x 43 x 25.95 mm (L x W x H)
Battery voltage 11.1 V, 3 S, LiPo, 3600 mAh - 4000 mAh
Input current Max. 19 A per DC motor
Input voltage 9 - 12 V/DC
Max power rating from main flight control board 350 mA/5 V (to power receiver and additional devices)
Operating temperature +10 - +40 Celsius
Operational area Indoors and outdoors at dry conditions
Wind during flight operation No to light wind
Physical Specifications
Dimensions (W x H x D) (Ø x H) 650 mm x 285 mm
Weight Approx. 1,100 g (with LiPo battery)
Motor Specifications
Battery dimension 142 x 43 x 25.95 mm (L x W x H)
Manufacturer Scorpion Power Systems
Model RCE-M650
Motor Body Length 1.23 in (31.33 mm)
Motor Kv 960 RPM / Volt
Motor Magnet Poles 14 p
Motor Max. Continuous Current 15 A
Motor Max. Continuous Power 160 Watts
Motor No-Load Current (Io/10V) 0.55 A
Motor Outside Diameter 1.13 in (27.9 mm)
Motor Overall Shaft Length 2.01 in (51 mm)
Motor Resistance (Rm) 0.144 Ohms
Motor Shaft Diameter 0.12 in (2.98 mm)
Motor Stator Arms 12 n
Motor Stator Diameter 0.87 in (22.0 mm)
Motor Stator Thickness 0.51 in (13.0 mm)
Motor Weight 2.54 oz (72 g)
Motor Wind 20 Turn Delta
Motor Wire 6-Strand 0.21 mm
Shear force (per motor) Max. 900 g








  

Write Product Review

You have to be logged in to write a review.
writes: 15.11.2012
I have just updated my RC EYE 650 quadcopter with the new firmware and I have to say, well done! It flies brilliantly! :-) Keep up the good work RC Logger!
writes: 14.11.2012
Just saw one of these tonight. Great looking multi rotor. Best I have seen on the market yet.
writes: 14.11.2012
Thank you, you have repeatedly shown that you have the interest of your customers (or future/potential customers) clearly in mind. Your customer service thus far has proven to be top notch. Keep up the great work.