RC Logger LC

Article 1 of 1

RC Logger LC

The "RC Logger LC" has an internal memory and logs all add-on sensor data into the memory which can be analyzed with the RC Logger Viewer PC Software.
1 rating
Weight: 0.1 kg

The "RC Logger LC" has an internal 4 MB flash memory chip and logs all add-on sensor data into the memory which can be analyzed with the RC Logger Viewer PC Software. Data may also be transmitted to a Notebook or PC via the down-link TX/RX module (not included). The "RC Logger LC" connects maximum 8 add-on modules at the same time and is fully compatible with the "RC Logger HD". Alternatively data may be viewed in real-time via the "RC Logger LC" LCD ground display station using the down-link module.

 The "RC Logger LC" can be triggered via a free RC receiver channel or manually and set to auto-triggering mode. It includes a microUSB charging port, a down-link data port to connect the TX/RX module as well as an add-on sensor data port and a power and status led as well as an on/off switch. The "RC Logger LC" is very small and light weight. The trigger interval can be set by the user via the RC Logger Viewer PC software. If the trigger cable (included) is connected the RC Logger LC will be powered by the RC -helicopters / -airplanes / -cars battery. 

The following items are included in the delivery:

Product code:

  • 10003RC
  • External sensor data bus (connect up to 8 external sensor modules)
  • Status LED
  • Power LED
  • Trigger/Power input (trigger automatically or by receiver/transmitter)
  • 4 MB internal flash memory
  • microUSB 2.0 data/charging port
  • TX/RX port for 2.4 GHz wireless ground transmission modules
  • Upgradeable firmware
  • Device driver for Windows 2000/XP/Vista/7 (64 bit currently not supported)
General Specifications
Connections Data to PC port (microUSB - USB 2.0), Trigger port (Futaba type), Module port (1 port / max. 8 modules), TX/RX module port
Internal battery 1 x CR1220 (3 V/DC)
Storage 4 MB
Technical Specifications
Current consumption max. 150 mA (without additional modules), max. 750 mA (with additional modules)
Operating voltage 4.8 to 6 V/DC
Output current to external sensor max. 600 mA
Output voltage to external sensor 3.6 to 6 V/DC
Physical Specifications
Dimensions (W x H x D) 52 x 15 x 33 mm
Weight 16.5 g

Write Product Review

You have to be logged in to write a review.
writes: 13.11.2012
Yea its great, very small and very high quality.
writes: 13.11.2012
I have been impressed with your quick response to my initial order, follow-up emails discussing the partial shipment and back order, emails when I had a problem, and now this offer. Your company's attention to customer service is outstanding and that surely bodes well for your success.