Turnigy Actio Cam to 5.8 VTX wiring
I have a Turnigy Action Cam and the micro usb cord that is used with it. The wires at the end are labeled AV- (blue), AV+(white), B-(black), B+(red). What wires should connect to what wire going into the 5.8 VTX. I have a battery pack to power the VTX (4AA batteries) if needed. Thanks
Last edited by marko500; 17.03.2016 at 01:01.
Welcome to the RC Logger forums! In regards to your question I am assuming you are speaking of our 5.8ghz video tx? Would you mind sharing a picture of the action cam and vtx so that we can further assist you?
Sorry for the slow response. Was out of town for the holiday weekend visiting with family.
Thanks for sharing the pics.
For the video transmitter:
Green wire= Video transmitter
White wire= Ground
Black wire= Audio left
Red Wire= Audio Right
That might at least be a start. I will also reach out to our other team members that might have more input on connecting the appropriate wires to each other.
Team member Jamie, and I have looked things over. The RC Logger 5.8 does not offer Positive power out to power the Camera, thus it will need to run on it's internal lipo. I would recommend the following for connection -
From RCL connector - (White) - to TGY connector (B-) = Ground
From RCL connector - (Green) - to TGY connector (AV-) = Video **Note, if no video feed, you may need to try (AV+) - One wire is audio, the other is video. Once video feed is located, the opposing wire is audio. Thus -
From RCL Connector - (Red, or Black *Both colors are audio*) - to TGY Connector (AV-, or AV+ depending on which is video).
If there are any more questions, please do let us know!