Sorry for the delay. Been a real busy weekend here
Was able to put together some more Navigator footage though!!!
Thanks very much Chris for sharing the footage!!!
A few things to share with the community that I've learned along the way.
1. Mounting the Go Pro near the GPS unit on the Navigator without proper shielding may result in unwanted flight behavior. I ended up moving the Go Pro to the underside on the front camera cover. This setup actually gave much better results. But there were some drawbacks.
2. With Go Pro mounted to the bottom of the Navigator the unit flew pretty well, but the issue now becomes that the unit will not sit level for take off.
3. The hot setup is either a Mobius or a RunCam mounted on the front camera cover. The tilt angle on the bottom of the cover is perfect for the mounting position!!!
I took some pics of the Go Pro mounting method I used. There are some mods that I made to be able to mount the cam in this position, but to me they were worth it. The pics show the Go Pro mounted, but Mobius, or RunCam can be mounted the same way.
With the camera mounted like this I noticed some really good vibration isolation improvements!
I'm loving the way Navigator is performing!!!!Here's some content I shot over the weekend. (Special thanks to Jamie for helping whip the video into shape!!)
Hope you enjoy!