Results 1 to 4 of 4

Thread: 250 mwatt fpv setting

  1. #1

    250 mwatt fpv setting

    Hi ,
    I read some where that its possible to set fpv camera to give 250mw of out put.
    Units are shipped out on channel 1 , and this is 25 mwatts.
    Any ideas which channels give 250 mwatts of out put ??
    Many thanks in advance.
    Cheers

  2. #2
    Administrator MatLi's Avatar
    Join Date
    20.09.2012
    Location
    Hong Kong
    Posts
    1,021
    All channels actually have the same output power.

    To increase the default factory set output power by factor 10x you need to move the jumper of the 3 pin header to the other 2 pins. I attached an image for your reference. There is a 3 pin header with a black jumper pre-installed at the factory. To increase the power just move the jumper from the pre-installed position over to the other pin.

    Click image for larger version. 

Name:	IMG_20161002_185129.jpg 
Views:	65 
Size:	92.2 KB 
ID:	2331

    Please take note that this does void FCC and CE as well as product warranty. Perform it at your own risk. Officially we do not recommend this modification. In general it will not harm the Navigator
    -=-=-=-=-=-=-=-=-=-
    Cheers,
    MatLi (Chris)

  3. #3
    Many thanks for that , ill give it a try

  4. #4
    Administrator MatLi's Avatar
    Join Date
    20.09.2012
    Location
    Hong Kong
    Posts
    1,021
    Quote Originally Posted by Javid View Post
    Many thanks for that , ill give it a try
    Your welcome And do keep us posted on your progress.
    -=-=-=-=-=-=-=-=-=-
    Cheers,
    MatLi (Chris)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •