Results 1 to 2 of 2

Thread: Battery Question

  1. #1

    Sad Battery Question

    I have a NovaX 350. The stock battery that came with the unit I have used exactly 3 times. I charged the unit fully per instructions upon receiving the unit. After my last flight, I let the battery "rest" over night, then the next morning plugged the battery in for charging. When I plugged the battery in, the "1S" light and the "Charge Status" light alternate blinking red?

    I have the Lipo type selected as well as the 3 cell type selected. Not sure what to do...

    Any suggestions? Can anyone tell me what the problem is? Thanks!
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	IMG_0104.JPG 
Views:	8 
Size:	728.0 KB 
ID:	2500  

  2. #2
    Hey KS,

    So sorry to hear of the issue that is occurring. Unfortunately when the Charge Status is flashing red this means that it is recognizing/encountering some issue. Unfortunately it's a little challenging to determine whether the issue is with the charger itself or with the lipo battery pack.

    Do you happen to have a lipo checker so you can check the voltage of each cell on the lipo or a multi-meter? If you have either of these this could be helpful to check the voltage.

    If not however, please no worries. We will be happy to supply the needed replacements to get you back up and flying as quickly as we can.

    Again we apologize for the issue that is occurring. Issues with our batteries and charger is extremely rare, so please note that this isn't a common problem, and hopefully replacing both you shouldn't experience this issue again.

    Best regards,
    Jamie and the RC Logger Team

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •